Top Speed Floor Sealer

Top Speed Floor Sealer
Product Code: 2002
Price: AU$72.00

Available Options


* Size:

   - OR -   

The all in one high solids sealer.

High gloss acrylic polymer with high performance using 2000 to 3000 RPM machine for best results.

Super clear non-yellowing high gloss needs no base coat, non-slip and longwearing finish.

STRIP- Remove all old polish and sealer using Super Floor Stripper ensuring to follow all procedures and directions as per label.
 
Pick up all remaining residue and rinse are with a solution of Neutraclean at a dilution 8ml/Litre of water.
 
After the stripped surface is dry and has been swept the surface is now ready to seal.
 
SEAL- Apply first coat of Top Speed using a clean applicator, allow 15-30 minutes drying time between coats. (This may vary depending on airflow and drying conditions).
 
Apply a further 3 coats of Top Speed ensuring each additional coat is laid on a dry surface.

If swallowed DO NOT induce vomiting, give a glass of water and seek medical advice. If skin contact occurs, remove contaminated clothing and wash skin thoroughly. If in eyes, hold eyes open and flood with water for at least 15 minutes and see a doctor.

No specific regulatory requirements apply.

Not classified as Dangerous Goods according to the criteria of the Australian Dangerous Goods Code, sixth edition.

Treat as non hazardous material, prevent from entering waterways.

For more details refer to MSDS.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: